Self- Propelled Modular Trailer (SPMT) Operator

• SPMT operator responsible for managing safe and efficient lifting or transfer operations in accordance with Company Policy, Quality Safety & Environmental Management System, and International Standards.

KEY ACCOUNTABILITIES

• Read and understand transport drawing then setup the SPMT configuration accordingly.
• Following typical Manufacture methods, builds trailers using basic hand tools to prepare for heavy hauling
• Ensures all components and the SPMT systems as a whole are in good working condition
• Troubleshoots any issues seen with the trailers which do not conform to typical, approved Manufacture methods.
• Assemble, disassemble, set, and configure (mechanically and electronically), operate the SPMT (Scheuerle) in any configuration and in any cargo type / weight, as per manufacture specifications
• Operate the SPMT on Shipyard roads, on ground, on floating vessel and during load out / load in operations.
• Check and maintain the efficiency of the SPMT, execute regular maintenance, and execute problem shooting
• Responsible for the daily and weekly control and maintenance of the SPMT 
• Reads and understands hydraulic and electrical schematics
• Adjusts trailers to ensure even distribution of weight across all axles, even over rough terrain
• Reports to various work sites as directed by the SPMT supervisor, dispatcher, or Superintendent on – time and ready to operate SPMT equipment or other assigned duties
• Has working knowledge of rigging and lashing and is able to perform basic rigging responsibilities 
• Able to independently position equipment in required/desired spots with or without a load
• Assists with jacking, pumping, carriage, winch and weighing work before, during and after move.
• Has basic knowledge of engineering drawings and is able to ensure that loads, loading methods, load securing, and load transport comply with the plan
• Capable of performing and checking rigging and lashing done on the SPMT and the load, to ensure that the move can be performed safely for personnel, load and equipment
• Operate the SPMT to execute Transport operation, SPMT assembly and reconfiguration under foreman supervision in line with SPMT operation manual, charts, Transport supervisor instruction, and approved Transport drawing.
• Ability to operate / assemble / reconfigure the SPMT according to the operation manual, under guidance of supervisor.
• Fills out the daily operations SPMT / transport checklist before any operation.
• Controls SPMT movements in response to hand signals or radio commands by certified L&R / Transport supervisors, Foremen, or operators. 
• Oversees the care and maintenance of SPMT/PPU equipment. Ensures proper licensing and inspections are kept current and coordinates the necessary maintenance and repairs of equipment with L&R / Transport supervisor and maintenance Dept.
• Ensure the safe and effective utilization of SPMT equipment.
• Make sure that all SPMT equipment is maintained in proper working order.
• Make sure that the required care and maintenance is accomplished on SPMT equipment/parts.
• Stop unsafe Transport activity and report any potential hazards to L&R / Transport supervisor, and safety team.
• Support the Production & Project supervisor with planned transport activity.
• Provides input for daily work sheets / SPMT time sheet for each project. 28. Awareness/knowledge of applicable Regulations, National and International standards
• Ensuring that all requirements / documents / permits are available before executing the transport.
• Must be able to work in a standard field environment (being aware of your surroundings and operations going on around you, SPMT size and required area for transport operation)
• Other duties as assigned by Supervisor / Foreman

Experience

• 8+ years of working experience in SPMT operation and Transportation industries,
• 5 Years of SPMT operating • Basic knowledge of hydraulic and electrical schematics and basic repairs
• Capable of reading and understanding hydraulic and electrical schematics
• Capable of reading and understanding engineered drawings
• Experience working with Scheuerle and Kamag SPMT and have basic knowledge about SPMT Maintenance.

Qualifications

• High School Diploma, or equivalent
• Hold valid 3rd party certificate to operate SPMT crane.
• Have SPMT written and practical training from world recognize training center in SPMT operation / maintenance.
• Lifting certificates / rigging training would be advantageous

Other Information

• Good communicator
• Work well under pressure
• Excellent attitude towards health and safety.
• Good physical / fitness and health condition as the job contain a lot of manual handling.
• Flexible – able to work shift work, performing duties at all hours